Blown-In Premium Fiberglass Insulation to Upgrade Attic in Clovis, CA

Before	After

We elevated the insulation thickness from just 6 inches to a substantial 14 inches. This substantial upgrade ensures maximum energy efficiency and brings unparalleled comfort to your home. Revel in the remarkable difference this enhanced insulation will make in optimizing your space!

Insulation Upgrade to R38 with Blown-In Fiberglass Insulation in 3600 Sq. Ft. Home in Clovis, CA

Before	After

The homeowner contacted Tyson Energy Solutions because of his concern over rising energy costs and the fact that his home had been so hot in prior years. Because of the cost associated with running his HVAC system in his large home, he knew he needed to take action before the summer hit in Clovis. We came out and inspected his attic and found that it only had batting insulation, which is not effective for preventing hot attic air from traveling into the living spaces of the home. We determined that an insulation upgrade was needed to achieve his goals of a more energy and cost-efficient home.

We achieved the Energy Star-recommended R38 level by blowing in premium fiberglass insulation to a height of 14 inches. Because it was blown in, it fills all of the nooks and crannies which were present with the batting insulation that he had. We also air-sealed visible air leakage points to help prevent air from traveling between the attic and the living spaces of the home. 

As a result of the insulation upgrade that we performed, the homeowner and his family will be able to enjoy a cooler, more comfortable home in the summer, a warmer home in the winter, and reduced heating and cooling costs for the life of their house.

Full Attic Restoration to Control Temperature and Reduce Dust in 3300 Sq. Ft. Home in Clovis, CA

Before	After

The homeowner contacted us because her home was extremely hot and it was expensive to run her air conditioner in her 3300 square foot home. She was eager to find a way to reduce her cooling costs. When we inspected her attic, we found that she only had about 4-5 inches of old, dirty, cellulose insulation in her attic. Not only was this insufficient to keep her home insulated and cool during the summer months, but it was also creating a lot of dust in the home. We determined that a full attic restoration was the best option to address her needs.

We began by sucking out all of the old, cellulose insulation and disposing of it. We then cleaned and sanitized the attic using DSV sanitizer to eliminate contaminants and irritants. Next, we thoroughly sealed air leakage points such as top plates, registers, recessed lights, and plumbing and wiring penetrations. During this process, we also installed rodent-proof barriers at potential entry points to prevent rodents and other animals from entering the attic. Lastly, we blew in 14 inches of fiberglass insulation, bringing the attic up to the Energy Star-recommended R38 level of protection.

As a result of our attic restoration, Nora and her husband will enjoy a cooler home during summer, a warmer home during winter, much less dust in the home, and reduced heating and cooling costs by up to 50% for as long as they live in the house.