Tyson Energy Solutions Before & After Photos
Click on a photo to enlarge.
The homeowner reached out to Tyson Energy Solutions because she was experiencing painfully high cooling costs that seemed to be increasing every year. In addition, she reported that her air conditioner was kicking on frequently, yet didn’t seem to ever cool the house sufficiently. She also reported having allergies to the dust that was constantly on every surface in her home.
Upon inspection of her attic, we discovered that she only had 2-3 inches of dirty, old, cellulose insulation in the home, likely the remnants of what was installed in the house when it was built in 1974. We determined that the best course of action to relieve her high energy bills and temperature discomfort was to do an attic restoration and install a QuietCool Smart Gable Attic Fan.
We began the attic restoration by extracting and disposing of the old insulation. We then cleaned and sanitized the attic using Nisus DSV sanitizer. This is a concentrated disinfectant, cleaner, mildewstat, fungicide, and sanitizer that kills a broad spectrum of viruses, bacteria, and fungi. Once the attic was cleaned, we identified all areas where air leakage could occur and sealed those areas with closed-cell foam. This included all top plates, wire and plumbing penetrations, and registers. By doing so, we prevented air from flowing between the attic and the home’s living spaces. Additionally, we installed barriers at any potential rodent entry points to prevent them from accessing the attic. We cleared the soffit vents to ensure improved ventilation of the attic space.
We then increased the level of insulation in the attic by blowing in premium, Johns Manville fiberglass insulation to a height of 14 inches. This provided the Energy Star recommended R38 level of insulation.
Lastly, we installed the QuietCool Smart Gable Attic Fan 3.0, which sucks cool air from outside the attic, thus further reducing the temperature and likelihood of heat transfer within the home.
The homeowner was thrilled with the results. Not only did she notice an immediate difference in the temperature, comfort, and air quality of her home, but her cooling costs were reduced by 75% in the first month after we performed the work. She will now get to enjoy lower heating and cooling costs and a more comfortable home for the life of her house.
Elsa contacted us during a ferocious Central Valley summer heat wave. Although her thermostat was set to 77, it was getting up to 83 degrees inside of her house, despite running her air conditioner all day. We took a look in her attic and found the culprit: low insulation. With only 3 inches of insulation protecting her home from the scorching attic heat, it was no wonder her HVAC system wasn’t able to work effectively. We determined that an insulation upgrade was the best route for Elsa.
We began by air-sealing visible leakage points with closed-cell foam to prevent air from leaking between the attic and the home’s living spaces. We then blew in premium, fiberglass insulation to a height of 14 inches, bringing the attic to the Energy Star recommendation of R38.
As a result of the insulation upgrade, Elsa and her family will enjoy a much cooler home during the summers, a warmer home during the winters, and she will cut her monthly heating and cooling costs by up to 30% for as long as she stays in that home.
Cameron was referred to Tyson through his brother, who’d had insulation added in his attic and had noticed a huge difference in his home’s comfort and in his cooling costs. We came out and examined Cameron’s attic and found that there was only about 2 inches of insulation present and debris was scattered throughout. Cameron decided to have us perform an insulation upgrade in order to help his home feel more comfortable and lower his bills.
We began by air-sealing visible leakage points using closed-cell foam. This is done to help prevent air from flowing between the attic and living spaces of the home. We then blew in 14 inches of premium, fiberglass insulation, bringing the attic up to the Energy Star-recommended R38 level.
As a result of the upgraded insulation, Cameron and his family will enjoy a cooler, more comfortable home in summer, a warmer home in winter, and reduced heating and cooling costs by up to 30% for as long as they live in the home.
Bonnie met Chris Tyson at the Fresno Home Show and learned about how proper insulation could help her home to maintain a comfortable temperature year-round and also reduce her heating and cooling costs. After the home show, Bonnie asked Tyson to come out and inspect her attic. When we did, we discovered that her attic only had about 3 inches of fiberglass batting present. As a result of her low insulation, she was spending significantly more on her heating and cooling bills each month as her home struggled to retain the conditioned air. She decided to upgrade her insulation to an R49 level, even more than the R38 level recommended by Energy Star for our climate.
We began the upgrade by air-sealing any visible leakage points with closed-cell foam. This helps to prevent airflow between the attic and living spaces of the home. We then blew in fiberglass insulation to the R49 level, or 16 inches.
Because of the insulation we added, Bonnie and her family will experience the following benefits for as long as they live in that home:
- Reduced heating and cooling costs by up to 30%
- A cooler, more comfortable home in summer
- A warmer, more cozy home in winter
The homeowner contacted Tyson Energy Solutions because his 1600 sq. ft. home was uncomfortably hot in the summer and frigid in the winter. Additionally, the homeowner’s young children were suffering from bad allergies year-round. Upon inspection of the attic, we discovered that not only was the insulation in the attic old and dirty, but six ducts for the HVAC system had eroded and were leaking air into the living spaces of the home from the attic.
We began the attic restoration by extracting and disposing of the old insulation. We then cleaned and sanitized the attic using Nisus DSV sanitizer. This is a concentrated disinfectant, cleaner, mildewstat, fungicide, and sanitizer that kills a broad spectrum of viruses, bacteria, and fungi. Next, we pinpointed all areas where air leakage could occur and sealed those areas with closed-cell foam. This included all top plates, wire and plumbing penetrations, and registers. By sealing the attic, we prevented air from flowing between the attic and the home’s living spaces. Additionally, we installed barriers at any potential rodent entry points to prevent them from accessing the attic. We cleared the soffit vents to ensure improved ventilation of the attic space.
Lastly, we blew in new, premium Johns Manville fiberglass insulation to a height of 14 inches. This provided the Energy Star recommended R38 level of insulation.
This homeowner and his family will now experience healthier indoor air, reduced heating and cooling costs, and a more comfortable temperature in their home year-round for the life of their house.