Tyson Energy Solutions Before & After Photos

The homeowner called Tyson Energy Solutions because her 1200 sq. ft. house was uncomfortably warm and her air conditioning costs were very high. When we inspected her attic, we found that she only had four inches of old, dirty, cellulose insulation. We also located multiple areas in her attic where contaminants and air were leaking from her attic into her living space. She noted that her house was always extremely dusty, even when she cleaned and dusted multiple times during the week.

We began the attic restoration by extracting the old insulation and disposing of it. We then cleaned and sanitized the attic using Nisus DSV sanitizer. This is a concentrated disinfectant, cleaner, mildewstat, fungicide, and sanitizer that kills a broad spectrum of viruses, bacteria, and fungi. Once we had a clean area to work with, we pinpointed all areas where air leakage could occur and sealed those areas with closed-cell foam. This included all top plates, wire and plumbing penetrations, and registers. By sealing the attic, air is prevented from flowing between the attic and the home's living spaces. Additionally, we installed barriers at any potential rodent entry points to prevent them from accessing the attic.

Once completed, we blew in 14 inches of premium, Johns Manville fiberglass insulation to a height of 14 inches, providing the Energy Star recommended R38 level.

Lastly, we installed a new attic access for the homeowner and replaced the old screen on the existing gable vent.

This homeowner and her family will certainly enjoy a more comfortable and healthier home with less dust for as long as they live in this house.

The homeowner called Tyson Energy Solutions because his air conditioner was constantly running in the summer. Upon inspection of his attic, we found that the insulation was insufficient- only about 4 inches- and the attic was sweltering and did not have proper ventilation. We determined that we needed to add more insulation and add a gable attic fan in order to cool his attic and allow his HVAC system to run efficienty.

We upgraded the homeowner's attic to the Energy Star recommended R49 level by increasing his insulation to 18 inches using our blown-in, premium Johns Manville fiberglass insulation. We also air-sealed any openings we saw using closed-cell foam. This was done to prevent air from transferring between the attic and the living spaces of his home. We cleared the soffit vents to ensure improved ventilation of the attic space.

We also installed a QuietCool Smart Gable Attic Fan 3.0. The fan can be manually controlled through an app on the homeowner's phone or set to turn on and off when varying temperature and humidity conditions are present. This ensures the greatest amount of both flexibility and control for the homeowner.

As a result, the home is now able to stay cool during the summer, and the homeowner will enjoy a more comfortable home and lower heating and cooling bills year-round for the life of the home.

The homeowner contacted us because her home was unbearably hot during a particularly bad Central Valley heat wave and her cooling bills were out of control. She specifically complained that her air conditioner was running constantly, but was not able to adequately cool her home. We inspected her attic and found that her insulation was very low, only about 5-6 inches. In addition, her gable vent needed to be re-screened as it was not allowing properly ventilation in the attic which was a major contributing factor to her ait conditioner not being able to function effectively.

To remedy this, we determined that we needed to do a full attic restoration. We extracted and disposed of the old insulation. We then cleaned and sanitized the attic using Nisus DSV sanitizer. This is a concentrated disinfectant, cleaner, mildewstat, fungicide, and sanitizer that kills a broad spectrum of viruses, bacteria, and fungi. Once we had a clean area to work with, we pinpointed all areas where air leakage could occur and sealed those areas with closed-cell foam. This included all top plates, wire and plumbing penetrations, and registers. By sealing the attic, air is prevented from flowing between the attic and the home's living spaces. Additionally, we installed barriers at any potential rodent entry points to prevent them from accessing the attic. We cleared the soffit vents to ensure improved ventilation of the attic space. We also re-screened her gable vent to allow proper ventilation.

We installed a new attic access because the old access was broken and therefore dangerous. It also allowed too much air to leak into the living spaces of the home. 

Lastly, we increased the level of insulation in the attic by blowing in premium, Johns Manville fiberglass insulation to a height of 14 inches. This provided the Energy Star recommended R38 level of insulation. 

As a result of this comprehensive attic restoration, this homeowner will enjoy a more comfortable home, lower heating and cooling bills year-round, and better indoor air quality for as long as she lives in the home.

Mollie contacted Tyson Energy Solutions because her home was unable to keep the cool air produced by her air conditioner in the house. She suspected that it was leaking out of the house because her HVAC system was constantly running and yet, always felt hot. She was looking to reduce her cooling costs while also making her home feel more comfortable. When we inspected her attic, we found that she only had about 3-4 inches of insulation present. We determined that an attic restoration was the best option for her to achieve her objectives.

We started off by removing all of the old, dirty insulation from the attic. Once the attic was bare, we cleaned and sanitized the attic using DSV sanitizer to eliminate contaminants and irritants. Once the attic had been sanitized, we meticulously air-sealed the attic using closed-cell foam in order to prevent air from traveling between the attic and the living spaces of the home. This included all top plates, registers, recessed lights, and wiring and plumbing penetrations. The last step was blowing in 14 inches of premium, fiberglass insulation, bringing the attic to the Energy Star-recommended R38 level.

As a result of the comprehensive attic restoration that we performed, Mollie and her family will enjoy a cooler, more comfortable home during summers, warmer temperatures in winter, reduced heating and cooling costs by up to 50%, and better indoor air quality for as long as they live in the house.

The homeowner contacted us because her home felt incredibly hot, which caused her to run her air conditioner constantly, leading to high cooling costs. We came out and inspected her attic and found the cause: there was only about 3 inches of dirty insulation in her attic, as well as a lot of debris. There was also evidence of rodent activity in the attic. When we showed the pictures to the homeowner, she decided to do a full attic restoration.

We performed the attic restoration by extracting and disposing of the old, cellulose insulation. We then cleaned and sanitized the attic using Nisus DSV sanitizer, which is a concentrated disinfectant and sanitizer that kills a broad spectrum of viruses, bacteria, and fungi. We then pinpointed all areas where air leakage could occur -- top plates, wire and plumbing penetrations, and registers -- and sealed those areas with closed-cell foam. By sealing the attic, air is prevented from flowing between the attic and the home's living spaces. We also installed barriers at any potential rodent entry points to prevent them from accessing the attic. We cleared the soffit vents to ensure improved ventilation of the attic space. 

Once the attic had been cleaned and air-sealed, we blew in 14 inches of premium, fiberglass insulation, bringing the attic up to the Energy Star recommended R38 level.

As a result of our attic restoration, not only will the homeowner and her family experience a more comfortable home, but better indoor air quality and lower heating and cooling bills for the life of the home.