Before & After

Tyson Energy Solutions Before & After Photos

Click on a photo to enlarge.

Comprehensive Attic Restoration in Large 4300-Square-Foot Home in Fresno, CA

Ron contacted Tyson Energy Solutions because his large home was extremely hot and was becoming increasingly expensive to keep cool during the hot summer months. He was looking to reduce his dependence on his air conditioner but still keep his house cool and comfortable. Although his home was built in 2002, when we inspected his attic, we found that he only had about 5-6 inches of old insulation present. We determined that a full attic restoration was the best option for Ron to achieve his goals. 

 

We began the attic restoration by vacuuming out all of the old insulation and disposing of it. Next, we cleaned and sanitized his attic using DSV sanitizer, a powerful disinfectant, to eliminate contaminants and irritants from the attic space. We then carefully located air leakage points and sealed them using closed-cell foam. This includes top plates, plumbing and wire penetrations, recessed lighting, and registers. We also installed rodent-proof barriers to keep rodents and other pests from entering the attic. Lastly, we blew in premium, fiberglass insulation to a height of 14 inches, providing R38 protection to the home.

 

As a result of the comprehensive attic restoration we performed, Ron and his family will not only enjoy a more comfortable home during summer and lower cooling costs, but also better indoor air quality and a warmer home in winter for as long as they live in that house.

Insulation Upgrade to R38 with Blown In Fiberglass Insulation in 2200 Sq. Ft. Home in Fresno, CA

Nikki contacted us because she felt that her heating and cooling bills were always high and her HVAC system was always running. Despite this, her home constantly felt cold in winter and hot in summer. We came out and took a look in her attic and discovered why: she only had about 3-4 inches of insulation, so the conditioned air was leaking into the attic and the attic air was leaking into the home's living spaces. To remedy this, we determined that the best course of action was an insulation upgrade. 

 

We began by air-sealing visible leakage points. This helps prevent air from traveling between the attic and the living spaces of the home. Next, we blew in Johns Manville fiberglass insulation to a height of 14 inches, bringing her attic to the Energy Star-recommended R38 resistance to heat flow necessary for our climate.

 

As a result of our insulation upgrade, Nikki will experience a reduction of her heating and cooling costs by up to 30% and more comfortable temperatures in her home year-round for the life of her house.

Attic Restoration - Removal, Sanitizing, Air-Sealing, and New Insulation Installation in Fresno, CA

Manuel contacted us because his 2400 sq. ft. home was expensive to keep cool during the summer months. Despite his high cooling costs and his air conditioner running constantly, his house never felt cool and comfortable. When we came out to inspect his attic, we found that Manuel's attic only had about 4 inches of insulation present, and there was old, dirty batting insulation scattered throughout the space. We determined that to help him achieve his goals of reducing his cooling costs and making his home more comfortable, a full attic restoration was the best option. 

 

We began by sucking out all of the old, dirty insulation and disposing of it. Next, we cleaned and sanitized the attic using DSV sanitizer to help eliminate the contaminants and irritants. We then installed rodent-proof barriers to prevent rodents and other pests from entering the attic. We also meticulously identified and air-sealed potential leakage points, including top plates, registers, recessed lights, and plumbing and wiring penetrations. The last step was blowing in 14 inches of premium, fiberglass insulation, which brought the attic to the Energy Star-recommended R38 level.

 

As a result of the comprehensive attic restoration we completed, Manuel and his family will enjoy a cool, comfortable home during the summer months, a warmer home in the winter, reduced heating and cooling costs by up to 50%, and better indoor air quality for as long as they live in that home.

Attic Restoration Including Air-Sealing and New Fiberglass Insulation Blown In -- Fresno, CA

Jerod called Tyson Energy Solutions because his home was hot and stuffy even though his HVAC system was running constantly. He was frustrated by his high cooling costs, especially given that his home never really felt cool. We inspected his attic and found that he only had about 3-4 inches of insulation present, with the floor joists being visible through the insulation. This was a major contributing factor to his home's inability to stay cool, as heat was easily able to penetrate the wood and thin layer of insulation. We determined that a full attic restoration would best address Jerod's concerns.

 

We began by sucking out all of the old, contaminated insulation. We then used DSV sanitizer to clean and sanitize the attic to eliminate contaminants and irritants. Next, we installed rodent-proof barriers to prevent rodents and other pests from entering the attic, and we identified and air-sealed leakage points including: top plates, wiring and plumbing penetrations, registers, and recessed lights. The final step was blowing in 14 inches of fiberglass insulation to bring the attic up to the Energy Star-recommended R38 level.

 

Because of the work we did in Jerod's home, he and his family will enjoy reduced heating and cooling costs by up to 50%, a cooler home during summer, a warmer home during winter, and better indoor air quality for as long as they reside in the home.

Insulation Upgrade - From 3 Inches to 14 Inches Using blown In Fiberglass Insulation in 3100 Sq. Ft. Home in Fresno, CA

Sean reached out to us because his 3100-square-foot house always felt how and uncomfortable, even though his cooling bills were astronomical because his air conditioner ran constantly. We came out and took a look in his attic and discovered the root problem: his attic only had about 3 inches of insulation. This allowed the hot attic air to permeate the living spaces of his home, thus making it hotter. We determined that an insulation upgrade up to R38 was necessary.

 

We began by air-sealing visible leakage points to help prevent the air from flowing between the attic and the home's living spaces. We then blew in premium, fiberglass insulation to a height of 14 inches. This brought the attic up to Energy Star-recommended levels for our climate.

 

As a result of the insulation upgrade we performed, Sean and his family will not only enjoy a cooler, more comfortable home in summer, but also a warmer home during winter, and reduced heating and cooling usage and costs by up to 30% for as long as they live in that house.

our service area

We serve the following areas

Our Locations:

Tyson Energy Solutions
5645 E Westover Ave #101
Fresno, CA 93727
1-559-754-0066
Top
Service Area
Free Quote