Before & After

Tyson Energy Solutions Before & After Photos

Click on a photo to enlarge.

Insulation Upgrade - Adding 11 Inches of Blown In Fiberglass Insulation on Top of Cellulose in Lemoore, CA

Elsa contacted us during a ferocious Central Valley summer heat wave. Although her thermostat was set to 77, it was getting up to 83 degrees inside of her house, despite running her air conditioner all day. We took a look in her attic and found the culprit: low insulation. With only 3 inches of insulation protecting her home from the scorching attic heat, it was no wonder her HVAC system wasn't able to work effectively. We determined that an insulation upgrade was the best route for Elsa.

 

We began by air-sealing visible leakage points with closed-cell foam to prevent air from leaking between the attic and the home's living spaces. We then blew in premium, fiberglass insulation to a height of 14 inches, bringing the attic to the Energy Star recommendation of R38.

 

As a result of the insulation upgrade, Elsa and her family will enjoy a much cooler home during the summers, a warmer home during the winters, and she will cut her monthly heating and cooling costs by up to 30% for as long as she stays in that home.

R38 Insulation Upgrade Using Blown In Fiberglass Insulation in 1700 Sq. Ft. Home in Lemoore, CA

Cameron was referred to Tyson through his brother, who'd had insulation added in his attic and had noticed a huge difference in his home's comfort and in his cooling costs. We came out and examined Cameron's attic and found that there was only about 2 inches of insulation present and debris was scattered throughout. Cameron decided to have us perform an insulation upgrade in order to help his home feel more comfortable and lower his bills.

 

We began by air-sealing visible leakage points using closed-cell foam. This is done to help prevent air from flowing between the attic and living spaces of the home. We then blew in 14 inches of premium, fiberglass insulation, bringing the attic up to the Energy Star-recommended R38 level.

 

As a result of the upgraded insulation, Cameron and his family will enjoy a cooler, more comfortable home in summer, a warmer home in winter, and reduced heating and cooling costs by up to 30% for as long as they live in the home.

Insulation Upgrade to R49 with Blown In Premium, Fiberglass Insulation in 1800 Sq. Ft. Home in Lemoore, CA

Bonnie met Chris Tyson at the Fresno Home Show and learned about how proper insulation could help her home to maintain a comfortable temperature year-round and also reduce her heating and cooling costs. After the home show, Bonnie asked Tyson to come out and inspect her attic. When we did, we discovered that her attic only had about 3 inches of fiberglass batting present. As a result of her low insulation, she was spending significantly more on her heating and cooling bills each month as her home struggled to retain the conditioned air. She decided to upgrade her insulation to an R49 level, even more than the R38 level recommended by Energy Star for our climate.

 

We began the upgrade by air-sealing any visible leakage points with closed-cell foam. This helps to prevent airflow between the attic and living spaces of the home. We then blew in fiberglass insulation to the R49 level, or 16 inches.

 

Because of the insulation we added, Bonnie and her family will experience the following benefits for as long as they live in that home:

 

- Reduced heating and cooling costs by up to 30%

- A cooler, more comfortable home in summer

- A warmer, more cozy home in winter

Insulation Upgrade with Blown Fiberglass to Increase to 14 Inches in Riverdale, CA

This customer was seeking help with his energy bills. We performed an insulation upgrade bringing the insulation from 3 inches to 14 inches. 

Insulation Upgrade to R38 to Help Keep the Home Cool with Blown In Fiberglass Insulation in Riverdale, CA

Alfonso was looking to reduce his heating and cooling bills and also help his home maintain a comfortable temperature. He discovered Tyson Energy Solutions from our stellar Google reviews and gave us a call. We came out and inspected his attic and found that his insulation was very low, only about 3 inches. Alfonso decided that he wanted to add more insulation on top to bring him up to an R38 level, which is what Energy Star recommends for our climate here in the Central Valley.

 

We started out the job by air-sealing any visible leakage points. This will assist with preventing air transfer between the attic and the home. We then blew in 11 inches of premium, fiberglass insulation. We were able to complete all of this in about 2 hours.

 

After adding the new insulation and bringing the attic up to current code, Alfonso will have lower heating and cooling costs by up to 30% and his home will more easily maintain a comfortable temperature year-round for as long as he resides there.

our service area

We serve the following areas

Our Locations:

Tyson Energy Solutions
5645 E Westover Ave #101
Fresno, CA 93727
1-559-754-0066
Top
Service Area
Free Quote